Listers,
"Finished" the install of my Raymarine EV200 in the Enterprise, all connected
to my old Octopus 1012 pump and linear drive.
The system powers on and I ran through the setup twice -- but no joy, the
rudder doesn't move.
The pump has four wires. Two, orange and black, are coming out of the black
part of the pump. I connected those to the "motor" connectors on the ACU. The
other two, both red, are coming out of the "front" end, which I connected to
the "clutch" connectors on the ACU.
The pump is at least 11 years old, possibly double that or even more.
Any idea if I have the wiring backwards? How does one test a hydraulic pump?
Any suggestions on troubleshooting?
All advice greatly appreciated.
All the best,
Edd
-------------------------------
Edd M. Schillay
Starship Enterprise
NCC-1701-B
C&C 37+ | City Island, NY
www.StarshipSailing.com
-------------------------------
914.332.4400 | Office
914.774.9767 | Mobile
-------------------------------
Sent via iPhone 6
iPhone. iTypos. iApologize
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
