And I do collect dirt in those spaces as well. Would love to figure something out especially in the galley where all those crumbs fall.
David F. Risch 1981 40-2 (401) 419-4650 (cell) To: cnc-list@cnc-list.com Date: Thu, 31 Mar 2016 17:58:51 +0000 Subject: Re: Stus-List Gasket? From: cnc-list@cnc-list.com CC: mike.h...@impgroup.com Rick These are all good questions. I just do not like the idea of a place for dirt to collect …. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Sent: Thursday, March 31, 2016 2:55 PM To: cnc-list@cnc-list.com Cc: Rick Brass Subject: Re: Stus-List Gasket? Are you really sure you want to seal around the new sole? How will the water get into the bilge when someone comes below in wet foulies, or drops the teapot, or inadvertently leaves the water inlet to the head unclosed when out sailing? Rick Brass Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike via CnC-List Sent: Thursday, March 31, 2016 1:05 PM To: cnc-list@cnc-list.com Cc: Hoyt, Mike <mike.h...@impgroup.com> Subject: Stus-List Gasket? Looking for ideas. The cabin sole on our boat sits in a recessed molded liner. To fit the new sole the old one was used as template and several fittings took place. Despite all this there is a gap between the molded edge of the hull liner and the edge of the new sole that varies from 1/8 to ¼ inch. What sort of gasket material have people used to make this look a bit nicer? Mike Persistence Launching next week in Halifax _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! Virus-free. www.avast.com
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
