I used silicon to fill gaps in Touche's head between Formica and glass. Hasn't yellowed in 15+ years.
How about some of that tub seal stripping? http://www.amazon.com/Red-Devil-0151-8-Inch-11-Foot/dp/B000NHPSCA I've never liked the stuff but it would be easy to remove if it didn't work for you. Dennis C. On Thu, Mar 31, 2016 at 12:15 PM, Hoyt, Mike via CnC-List < cnc-list@cnc-list.com> wrote: > Thanks Dennis > > > > I thought of that. However silicon tends to yellow and pull away from the > edges over time. Was wondering if there was a more durable solution of > some sort. Perhaps even a rubber gasket material of some sort that > compresses … > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Dennis > C. via CnC-List > *Sent:* Thursday, March 31, 2016 2:11 PM > *To:* CnClist > *Cc:* Dennis C. > *Subject:* Re: Stus-List Gasket? > > > > Sounds like a spot for white silicon to me. > > Dennis C. > > > > On Thu, Mar 31, 2016 at 12:04 PM, Hoyt, Mike via CnC-List < > cnc-list@cnc-list.com> wrote: > > Looking for ideas. > > > > The cabin sole on our boat sits in a recessed molded liner. To fit the > new sole the old one was used as template and several fittings took place. > Despite all this there is a gap between the molded edge of the hull liner > and the edge of the new sole that varies from 1/8 to ¼ inch. What sort of > gasket material have people used to make this look a bit nicer? > > > > Mike > > Persistence > > Launching next week in Halifax > > > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
