I have done nothing in the last 8 or so years at least, I replaced the bullet anode on the rear of the prop about 8 years ago and it's still good but I use a donut anode on the shaft right in front of the hub behind the strut...very close to the prop, maybe quarter inch away, it gets replaced every year...also replace the teardrop anode forward of the strut...costs about $25 Cdn every year, I view that as normal maintenance for anodes but the bullet anode aft end of the prop lasts longer with these 2 on the shaft in front of the prop...the bullet is rather expensive, about $40 Cdn so I don't want to replace it every year...other than that scape a few barnacle off the hub some years Dwight Veinot C&C 35 MKII, Alianna Head of St. Margaret's Bay, NS d.ve...@bellaliant.net
On Sun, Feb 7, 2016 at 9:55 AM, Josh Muckley via CnC-List <cnc-list@cnc-list.com> wrote: > Dwight, > > What type of annual maintenance is required? I assume anode replacement and > grease? > > Josh > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
