When I sent in an inquiry this was their response. I replied that a 16" prop was smaller than my current 17" Martek. They replied that they've sold this prop is what best works on the boat, that they had sold many of them and not had any complaints.
With a 3GM30, 27/3600 ( gear reduction ratio 1:2,61 ) we would recommend a 2-blade 16x12R or a 3-blade 16x11-3R propeller for your C&C 35MKIII . The price for a complete 2-blade 16x12R propeller with hub for SAE standard shaft is USD 1,205 The price for a complete 3-blade 16x11-3R propeller with hub for SAE standard shaft is USD 2,035 Price is incl. shipping costs with a door-to-door service by UPS from Flexofold in Denmark to the address in the USA (mainland). Please check if there are some local duties. Unless someone has or recommends a different size Flexfold prop on a 35 MK 3 I'm going to order the recommended 2 blade. Dave C&C 35 MK 3 ----- Original Message ----- From: "Nauset Beach via CnC-List" <cnc-list@cnc-list.com> To: cnc-list@cnc-list.com Cc: "Nauset Beach" <nausetbe...@optonline.net> Sent: Friday, February 5, 2016 5:29:17 PM Subject: Re: Stus-List Propeller Question for 35-3 Dave, Which Flex prop are you getting? Do you have a Yanmar 3 GM30F engine? Am looking at replacing my prop. Thanks Brian From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave via CnC-List Sent: Friday, February 05, 2016 3:49 PM To: cnc-list@cnc-list.com Cc: davidjaco...@comcast.net Subject: Re: Stus-List Propeller Question for 35-3 I'm with Tim. I had my Martek rebuilt last spring and was really disappointed because even after the rebuild it wouldn't always open evenly. I'm replacing it with a FlexFold. By the way reverse was OK you just need to get use to it. Dave C&C 35 MK 3 Saltaire Bristol, RI _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
