The 3GM engine would indicate the boat’s original engine was replaced and the monel fuel tank is a very good thing. I would not buy a car, airplane, or boat sight-unseen myself, but too late now. I hope this works out – the 35s (all versions) are nice boats! Joe Della Barba C&C 35 MK I Coquina www.dellabarba.com
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rino Granito via CnC-List Sent: Wednesday, February 03, 2016 6:46 PM To: cnc-list@cnc-list.com Cc: Rino Granito Subject: Re: Stus-List Made an offer on a C&C 35 mk2 Good day.. It has a 3GM Indirect cooling from what I can tell and a Monel fuel tank... again I need to validate this.. Now for the kicker, and please no flaming :( I made an offer based on a discussion and photos , I did not see in person the boat yet.. We already had been on a few 35Mk2 before and loved this boat.. So when we saw a nice 3gm , new running and standing rigging, we jumped.. and pulled the tricker.. Thanks, On Wed, 2016-02-03 at 18:31 +0000, Della Barba, Joe via CnC-List wrote: What engine does the boat have? An original A4, if RWC, can be considered fully depreciated by now and most of them are RWC. The optional diesel as a creation made by Westebeake from MG Midget engine blocks. From all I have read, it made a nice little engine but parts are almost impossible to get now. Joe Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave Syer via CnC-List Sent: Wednesday, February 03, 2016 1:14 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Dave Syer Subject: Re: Stus-List Made an offer on a C&C 35 mk2 Rino, Agreed with Steve, after reviewing MANY surveys over and crawling around many boats, over 3 decades, I find most are very superficial indeed. To be fair, most surveyors cannot realistically know the specific issues to look for in each model. That said, we are in C&C land and several of the local surveyors know the boats and a few actually worked for C&C over the years. (one - a dutch name escapes me, but a good guy and he's down your way.) FWIW When I inquired about some work with Bristol marine in Port Credit, Nick Bailey made the following recommendations of surveyors who they felt knew C&C boats. No affiliation or relationship etc... have an experienced surveyor familiar with these issues look at the boat. i.e. Bill Provis, 416-801-5527<tel:416-801-5527>; Peter McGuire 416-809-2186<tel:416-809-2186>; or Wallace Gouk 416-526-3845<tel:416-526-3845> That said, read up, ask questions here and do your own survey as well.....lift the cabin sole, look at all of the floor timbers (whatever they're called in a plastic boat) One thing I did not do and should have, was insisted on the opportunity to put the boat through its paces in the water, under power. Good Luck! Dave - 1985 33ii Message: 5 Date: Wed, 3 Feb 2016 11:26:47 -0500 From: Stevan Plavsa <stevanpla...@gmail.com<mailto:stevanpla...@gmail.com>> To: "cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>" <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Subject: Re: Stus-List Made an offer on a C&C 35 mk2 Message-ID: <CADdEvn48gjMnZsy2_OjyVksVUZEEiiUbHCJbZULboa+TeBh=u...@mail.gmail.com<mailto:u...@mail.gmail.com>> Content-Type: text/plain; charset="utf-8" Peter McGuire, Fastnet Yacht Services. He did mine. I wasn't unhappy with the work but since then I've questioned the value of surveys in general. He didn't tell me anything I didn't know. He did a good job but stayed within his scope. I can send you my survey if you want a sample of the work. I don't believe I'm breaking any agreement by sharing it. I'm far from a pro, just a blunderer who's read a lot of Don Casey and Nigel Calder. I own the same moisture meter that those guys use. The notion that you have to be a rocket surgeon to use a moisture meter is a little beyond me. There's a lot an amateur can learn about a boat with one of those before spending $600 on a survey. Sure, you can get false positives, like backing plates registering as moisture .. but you won't get false negatives. If there's moisture, it'll find it. Steve Suhana, C&C 32 Toronto _______________________________________________ Email address: CnC-List@cnc-list.com<mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
