Hi Merek. I couldn't agree with you more. It's just, the more I think about it, how much do I want to push them if they are afraid or worse, simply unwilling? "It's not what we're used to so, we can't do it"
I'm beginning to believe the latter is the case. Maybe they believe their equipment is not up to the task... Thanks for the suggestion though. I'm sure that's the way it could be done as it is a double spreader rig. DannyOn Oct 29, 2015 11:37 PM, Marek Dziedzic via CnC-List <cnc-list@cnc-list.com> wrote: > > Danny, > > You can always devise a bridle that would grab the mast by the spreaders > (without putting any pressure on the back of the mast). You can get up to the > spreaders using a small ladder (or get yourself lifted in a bosun’s chair or > a harness). This is a reasonably standard practice if your mast has two set > of spreaders (e.g. like mine). > > > > Of course if the yard has its own way and does not want to listen to > suggestions, you cannot do much. It helps if you demast on your own (how we > do it in our Club) - you can fiddle to your heart’s desire. > > > > Good luck > > > > Marek > > 1994 C270 “Legato” > > Ottawa > > > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny > Haughey via CnC-List > Sent: October-29-15 15:07 > To: cnc-list@cnc-list.com > Cc: Danny Haughey > Subject: Stus-List Boom Furling complications > > > > Hi All, > > > > So, it seems the yard said they cannot remove the mast because of the sail > track that rides up the mast track for the furling system. > > > > I basically have two options where they are concerned. Find another yard for > storage or, wet store the boat in a slip. > > > > I don't think I would mind the wet storage option if she wasn't in such a > need for a bottom job. > > > > What do you guys think? > > > > The reason they cannot remove the mast is because they use a sling and the > sling would damage the track... > > > > Maybe someone can recommend a place nearby where I can store her on the hard. > i know not every yard requires the removal of the mast. > > > > Danny > > Westport Point, MA _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
