Terry,

Per your original email you are referring to the WHITE fittings NOT the
grey ones,  correct?

The white ones came with the pump and are the suction and discharge check
valves.  See my previous emails.

As others have said the grey ones are Qest.  The largest selection can be
found here.

https://www.plumbingsupply.com/polyb.html

You'll probably want to bookmark the website since you're likely to need
these fittings in the future.  When assembling don't use any sealants.
Hand tighten and then add ~1/4 turn.

Josh
On Oct 30, 2015 9:05 PM, "Terry Pearson via CnC-List" <cnc-list@cnc-list.com>
wrote:

>
>
> Hello all, first, I own a 1986 C&C 33 MK2, while winterizing my boat, I
> found a water leak on the discharge side of my potable water pump. The
> fitting between the pump and the elbow was cracked. I tried to unscrew the
> fitting and the theads snapped off in the pump housing. i haven’t tried
> yet, but am pretty certain I can use an ease out to get the remaining
> treads out of the pump. The problem I am having is I can not find the
> replacement part, or even know what it is called. Its a a white plastic
> fitting, male threads on both ends with a ball check valve built into the
> fitting. any help would be greatly appreciated.
>
>
> Terry Pearson
>
>
>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to