I know whereof you speak about the location <http://roninrebuild.blogspot.com.es/2014/02/battery-management.html> of the original breaker switch...
You’ll be happy with that solution. ;-) Dave Godwin 1982 C&C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit <http://roninrebuild.blogspot.com/> > On Sep 8, 2015, at 3:03 AM, Dave via CnC-List <cnc-list@cnc-list.com> wrote: > > Thanks guys, Paul nailed it, though I wasn't entirely clear. I am replacing > the battery switch (below which, in a prime kick-off location, is mounted a > single toggle breaker, protecting the 12vdc house panel.) I am replacing > the entire panel with a more complete solution. > > In case you are curious: > > https://www.bluesea.com/products/8690/Dual_Battery_Bank_Management_Panel > > This happens to come with a 100a breaker, (non-kick able) hence the question. > It also isolates the start and house batteries, but allows them to be > paralleled in case of emergency, plus includes 24/7 breakers for float > operated bilge pumps, electronics memory, etc... Tidy! > > Will wire the existing group 31 batteries in parallel to become a dedicated > 240AH house bank, add a dedicated group 24 start battery, a vsr, a victron > bmv700 monitor, and revise the stock wiring to incorporate a proper ground > bus. Major improvement in functionality I think, with the only real added > weight being the start battery. Already have a xantrex charger. > > Thanks for the responses. > Dave > > Sent from my iPad > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
