Harold, That should help. Hutton-Arco in Australia is your best bet, but shipping is SLOW! http://www.arco-winches.com/products/spares
There is an outfit in England, winch spares. Joel On Wed, Jul 29, 2015 at 3:32 PM, patricia barkley-higginbottom via CnC-List <cnc-list@cnc-list.com> wrote: > Thanks to those who had suggestions regarding a slipping self tailing > winch. I found a schematic for the winch, removed the tailing arm, found > that the spring loaded screws could be tightened , which I did and then > went for a sail. The wind died before getting a chance to see if there was > an improvement, but it gave me the idea that perhaps the springs are tired > too and possibly replacing them might be beneficial. Now the question is > who might stock them. I seem to remember that there is an outfit in > Australia. Will have to do a web search, unless anybody has a better idea. > My drums look suitably rough and usually very few wraps are all that is > required. It was the self tailer that let go. > Harold > Celtic Spirit > Hamilton, ON > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Joel 301 541 8551
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
