I have heard that although 5200 is amazingly strong, the chemicals in it attack the plexiglass and will eventually cause premature crazing. I hope yours buck the trend. Keep us posted.
Cheers Brent C&C 27-5 Lake Winnipeg. Sent from my iPhone > On Jun 21, 2015, at 9:25 PM, S Thomas via CnC-List <cnc-list@cnc-list.com> > wrote: > > I used 4000UV to caulk along the top of my > glued-and-screwed-on-to-the-outside-of-the-boat windows without frames, and > after a couple of years it pulled away from the Plexiglas. Not a lot, but > enough to form a small gap that water can flow through. Stayed stuck real > good to the gelcoat though, so I am trying to seal the small gap with > creeping crack cure. > > Steve Thomas > C&C27 MKIII > ----- Original Message ----- > From: PME via CnC-List > To: cnc-list@cnc-list.com > Cc: PME > Sent: Sunday, June 21, 2015 21:11 > Subject: Re: Stus-List A good day > > > May your port never leak again, but if a different ports leaks consider not > using 5200. I like 4000UV. > > > - > Paul E. > 1981 C&C 38 Landfall > S/V Johanna Rose > Carrabelle, FL > >> On Jun 21, 2015, at 7:48 PM, cnc-list-requ...@cnc-list.com wrote: >> >> the 5200 that I used to rebed the >> fixed portlights in my Beckson windows is sound with no leaks after 2 >> weeks, only time with more will tell how this repair holds up over the long >> run but right now I am happy: > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
