David,
Base styles B C and D attach only through the toe rail. (style A is used on my friend's 1983 29 mk2, and has one hole in the deck and uses two of the hull to deck through bolts.) Which base you need depends on what cross section of toe rail you have. I converted my 76 model 38 mk2 from the old style bases mounted to the deck to style B, which are the bases for my particular toe rail. No holes in the deck. Two bolts through the hull to deck joint and toe rail (one of them is an existing hull to deck bolt, but the other was a new hole that had to be drilled because the bolt hole spacing is slightly off.) The other bolt goes through the upright leg of the toe rail itself. As far as I can see, these bases make for a much stronger stanchion arrangement, eliminated the cracking of the deck gelcoat (which, I'm reminded, is another cosmetic repair I've not gotten to yet) and gained about 4" more width to the side decks. The stanchions with legs you see on the same page goes into two of these bases. Rick Brass Imzadi C&C 38 mk 2 la Belle Aurore C&C 25 mk1 Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via CnC-List Sent: Wednesday, May 27, 2015 9:55 AM To: CNC CNC Cc: David Subject: Re: Stus-List Stanchion Legs For Gates... Thanks Bill, but I was looking for legs that terminate and secure at the toe-rail. Was trying to avoid more holes in the deck. David F. Risch (401) 419-4650 (cell) _____ To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Date: Wed, 27 May 2015 08:35:47 -0400 Subject: Re: Stus-List Stanchion Legs For Gates... From: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> CC: colt...@verizon.net <mailto:colt...@verizon.net> Dave, Maybe they are too busy to be bothered right now, B/C it appears they do have them, http://southshoreyachts.com/product-category/cc-parts/page/3/ Regards, Bill Coleman CC 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via CnC-List Sent: Wednesday, May 20, 2015 2:12 PM To: CNC CNC Cc: David Subject: Re: Stus-List Stanchion Legs For Gates... Tried them. Want to bolt base to toerail and not the deck. Less holes and all that. David F. Risch (401) 419-4650 (cell) _____ Date: Wed, 20 May 2015 14:06:20 -0400 To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Subject: Re: Stus-List Stanchion Legs For Gates... From: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> CC: joel.aron...@gmail.com <mailto:joel.aron...@gmail.com> South Shore Yachts in Toronto? On Wed, May 20, 2015 at 2:02 PM, David via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Anybody know a source for stanchion legs for our toerails? Thanks in advance. David F. Risch 1981 40-2 (401) 419-4650 (cell) _______________________________________________ Email address: CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com -- Joel 301 541 8551 _______________________________________________ Email address: CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
