I use 3/8" for main and jib.
Neil Gallagher
Weatherly, 35-1
Glen Cove, NY
On 5/8/2015 3:05 PM, Kyle Mello via CnC-List wrote:
That's great news. Did you switch your main halyard to 3/8's or 7/16?
On Fri, May 8, 2015 at 2:58 PM, Neil Gallagher via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
Kyle,
I made the switch from wire to rope on my 35-1 without changing
the sheaves. Works fine, no sign of unusual wear.
Neil Gallagher
Weatherly, 35-1
Glen Cove, NY
On 5/8/2015 2:27 PM, Kyle Mello via CnC-List wrote:
Hello, I have a 72 C&C 35 MK1 and I am looking fora advice on
where to get some replacement sheaves. I am switching to rope
from wire halyards. I have looked online and called Hall in my
home town of Bristol without any luck.
There are 3 sheaves that need to be replaced. See dimensions below.
2 larger sheaves are
4.1" in diameter or 104 mm
center hole is 1/2"
thickness is 1/2"
Small sheave (main sail)
3.5" diameter
center hole is 3/8"
thickness is 7/16
As far as I can tell the boat was made in Canada by George
Hinterholler.
Any input would be helpful.
-Kyle
_______________________________________________
Email address:
CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>
To change your list preferences, including unsubscribing -- go to the
bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>
To change your list preferences, including unsubscribing -- go to
the bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
