Pleae ignore From: Hoyt, Mike Sent: Tuesday, April 28, 2015 9:17 AM To: 'Rochester.rr.com'; 'cnc-list@cnc-list.com' Subject: RE: Stus-List 2 coats of VC17
Boat propeller measurements From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rochester.rr.com via CnC-List Sent: Monday, April 27, 2015 1:10 PM To: Marek Fluder; cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Subject: Re: Stus-List 2 coats of VC17 Hi sounds to me like the 1st coat was not dry completely Brian Donovan 112 Frisbee Hill Rd Hilton NY 14468 (585) 313-1940 On Apr 27, 2015, at 10:12 AM, Marek Fluder via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: The specs are calling for at least 2 coats when stripped to bare fiberglass. First one came out nicely rolled on with 4" foam roller. When I started the second coat I've noticed the first one gets dissolved and white fiberglass is showing. This brought the memories when I've done the same on my previous C&C24 - back then I managed to do the second coat, but it was a struggle. I am thinking of leaving only 1 coat on as it looks good. Has anyone put on 2 consecutive coats and what was the experience? Marek C320 Hamilton, Ontario _______________________________________________ Email address: CnC-List@cnc-list.com<mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
