Marek . Did you clean the fiberglass with 202 cleaner ? I put inter-protect 2000 epoxy on the bottom before I applied the VC17
Sent from Joe Bognar > On Apr 27, 2015, at 11:10 AM, Rochester.rr.com via CnC-List > <cnc-list@cnc-list.com> wrote: > > Hi sounds to me like the 1st coat was not dry completely > > Brian Donovan > 112 Frisbee Hill Rd > Hilton NY 14468 > (585) 313-1940 > >> On Apr 27, 2015, at 10:12 AM, Marek Fluder via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> The specs are calling for at least 2 coats when stripped to bare fiberglass. >> First one came out nicely rolled on with 4" foam roller. >> When I started the second coat I've noticed the first one gets dissolved and >> white fiberglass is showing. >> This brought the memories when I've done the same on my previous C&C24 - >> back then I managed to do the second coat, but it was a struggle. >> I am thinking of leaving only 1 coat on as it looks good. >> >> Has anyone put on 2 consecutive coats and what was the experience? >> >> Marek >> C320 >> Hamilton, Ontario >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
