Yep, that's exactly how my panel is and I did see those bolts. I guess I was expecting a bar or something. Thanks a lot. This is my first electrical project.
Sent from my iPad > On Mar 11, 2015, at 10:13 PM, Rick Brass <rickbr...@earthlink.net> wrote: > > Remove the panel from its mounting slots (lift up, pull the bottom forward, > and then lower out of the top slot. That's the way mine is rigged. If > different from yours, just ignore this email.) > > On the starboard side of the wiring compartment about 4 or 5 inches from the > top you should see two "bolts" sticking out about an inch or two. One of > these is the ground and will have a bunch of black wires affixed to it. One > of the fatter black wires in the common ground for all the panel wiring down > to the battery wire connection on the engine block. > > The other "bolt" on my boat is the common positive from the battery 1-2-all > switch to the panel, and most of the fuses get power from this point. > > > Rick Brass > Imzadi 1976 C&C 38 mk 2 > Hull # 049 > Washington, NC > > > > -----Original Message----- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joseph > Scott via CnC-List > Sent: Wednesday, March 11, 2015 9:47 PM > To: cnc-list@cnc-list.com > Subject: Stus-List 1976 C&C 38 Electrical Panel > > Hey All > > I am looking at installing a DC refrig system. The old one I pulled out was > AC so I need to run new wiring. When I look at the fuse panel all I see it > a place for the positive wire. I don't see anywhere to attach the negative > or anywhere that the negative comes into the panel. Shouldn't it be there > somewhere? > > Thanks > > Joe > > Sent from my > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
