I used CSC on Touché for several years in both salt and brackish waters. Anti fouling was good. Won our share of races.
Dennis C. Sent from my iPhone > On Mar 10, 2015, at 8:39 AM, mike amirault via CnC-List > <cnc-list@cnc-list.com> wrote: > > I am in the same marina as Dwight Veniot and I did use Amercoat #4 for > several years. As an antifouling agent it works very well but I found it to > be too ablative for my boat which sails about 1000nm per season. After a > power wash in the fall, the hull would be nearly bare. Since that time, I > have switched to micron CSC which holds up much better and sometimes just > needs a "brokers" touch up rather than a full coat each year. Therefore, I > think any cost savings you will get with the Amercoat are offset by just > going with CSC. > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
