I replaced with new Garhauer traveler (track, car, etc.). The new track is higher profile and does not need the channel, went with Guido's recommendation. More than 10 years trouble free. The track is longer than before. I used heavier bolts and washers.
Leslie Phoenix C&C32 1983 -------------------------------------------- On Thu, 3/5/15, Douglas Mountjoy via CnC-List <cnc-list@cnc-list.com> wrote: Subject: Re: Stus-List Traveler Blocks on 38-3 To: "Mike Flannery" <mikeflannery...@yahoo.com>, "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> Date: Thursday, March 5, 2015, 10:24 AM On Pegasus I just installed a new Garhauer traveler. I used the original bridge but added a 1" square tube to space it above the channel the original was in. Guido drilled the new track to fit my bridge (holes in different places, all screws busted off). Doug sv Pegasus LF38 hull #4 On Thu, Mar 5, 2015 at 9:36 AM, Mike Flannery via CnC-List <cnc-list@cnc-list.com> wrote: Has anyone replaced the traveler system or found alternate blocks. So cramped in there? _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com -----Inline Attachment Follows----- _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
