I have a 1” shaft, 44” long. Propeller shaft. About 2 ½” long keyway, I think they are all ¼” key
Regards, Bill Coleman From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S via CnC-List Sent: Wednesday, February 18, 2015 5:26 PM To: Bruno Lachance; CNC boat owners, cnc-list Subject: Re: Stus-List Need help from a fellow Cnc listers in Florida Bruno, You are a very good friend. What make and model boat does your friend have? 1" Shaft". Length? Keyway dimensions? Taper for the prop? Cutless bearing OD and length? There is a slim chance someone on this list has replaced theirs so your friend may have to haul the boat, remove the shaft, measure everything and order the right parts? If he's doing all this he should also replace the piece of hose between the shaft log and the stuffing box if it's older than 10 years? I doubt anybody but the builder keeps prop shaft dimensions for a specific boat. Best of luck. Chuck Resolute 1990 C&C 34R Broad Creek, Magothy River, Md _____ From: "Bruno Lachance via CnC-List" <cnc-list@cnc-list.com> To: cnc-list@cnc-list.com, "Bruno Lachance" <bruno_lacha...@hotmail.com> Sent: Wednesday, February 18, 2015 10:18:37 AM Subject: Stus-List Need help from a fellow Cnc listers in Florida Hi, I need the help and support of the list to find a solution for a friend of mine that is stock with his boat and family in Georgetown, Exumas, Bahamas. His 1 inch shaft (the boat) simply broke in two pieces after catching a line at 2600 rpr. Probably a manufacturing defect. He needs replacement parts before he haulout the boat for the repair. I am waiting for precise specifications (lenght, size, etc...), but he needs to find a shop in Florida that could ship him the replacement parts ASAP. He needs a new 1 inch shaft and a new cutlass bearing and would also like a drive saver coupling plate. Specifications following soon... Anybody outthere that could help me help him ? I am looking for references on a good shop that could take charge of this and organize the shipping, any onsite help would also be appreciated if needed. I am in Quebec, Canada. I could pay the order via my credit card on the phone. Thanks a lot, please contact me off the list if you are in a position to assist. Bruno Lachance Bécassine, 33 mkII New-richmond, Qc _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
