Chuck, I had my backstay adjuster serviced by CBR years ago.It was expensive and I was told that it would not pump to its original load.
I’d be very interested in the name of your local guy because it needs to be service again… Best, Dave Godwin 1982 C&C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit <http://roninrebuild.blogspot.com/> > On Feb 4, 2015, at 6:25 PM, Chuck S via CnC-List <cnc-list@cnc-list.com> > wrote: > > Tracy, > Chesapeake Bay Rigging, a Navtec Certified Dealer quoted me $800 to rebuild > my ram in 2007. The local hydraulics guy charged me $25 to change the O > rings in both the ram and the manual pump, and pressure tested both to 4000# > for me. He also advised me to stop using the transmission fluid used by the > PO and switch to 10 weight, non-detergent oil. Still tight after 7 years. > > > Chuck > Resolute > 1990 C&C 34R > Broad Creek, Magothy River, Md > > From: "Jean-Francois J Rivard via CnC-List" <cnc-list@cnc-list.com> > To: cnc-list@cnc-list.com > Sent: Wednesday, February 4, 2015 4:30:38 PM > Subject: Re: Stus-List Navtec pump service on Upper Gulf Coast > > Hi Tracy, > > I have the guy for you: Rick Zern http://zernrigging.com/ > <http://zernrigging.com/> he's a Navtec Certified Rigger. > > Rick is awesome, he's detail oriented, methodical, and very knowledgeable. > Many of the guys on my lake (Lake Lanier in the Atlanta suburbs) fly him > over to take care of their boats. He's J-boat racer and is familiar with rod > rigging too (Kind or a rarity these days) > > He's located in Pensacola, Phone Number 850.261.4129 > > Tell him Francois from Atlanta / Lake Lanier sent you. > > Good Luck, > > Francois Rivard > 1990 34+ "Take Five" > Lake Lanier, Georgia > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
