I have also found that Watco Danish Oil Cherry is an exact match for the original on my 1990 34+. They may have used something else earlier as mine seems to have more of a reddish hue than I have seen on other older C&Cs.
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Sent: Tuesday, January 20, 2015 6:51 AM To: Nate Flesness; cnc-list@cnc-list.com Subject: Re: Stus-List Teak stain? On my new cabinets I've use Watco Danish Teak Oil ( which my friend who does wooden boat restoration says is the very best you can buy) and one or two coats on the new teak exactly matches the old factory. All the teak on my 38 mkII is oiled, not stained and varnished. I have been using Starbright teak oil from WM to maintain the teak on both the 25 and the 38, but wil use Watco in the future. Particularly since I found someone who sells quarts on EBay for half the local price and less than the Starbright. Rick Brass Sent from my iPad On Jan 19, 2015, at 09:21, Nate Flesness via CnC-List <cnc-list@cnc-list.com> wrote: A lister (whose name I've lost) posted this hard-won formula a few years ago. I have used it several times, and its a perfect match to the factory finish (which is definitely a warm brown stain) on my 1980 30-1. Minwax Wood Finish (Stain) 1 part Provincial (211) 2 parts Golden Pecan (245) 2 parts Colonial Maple (223) Mix, apply, wipe off. Nate "Sarah Jean" Siskiwit Bay Marina Lake Superior On Mon, Jan 19, 2015 at 12:19 AM, David Blair via CnC-List <cnc-list@cnc-list.com> wrote: Jim I had the same question as one could see bits of stain onto the backs of some pieces. The old guy at the Lumberworld on Quadra took one look at it and reached for the Watco Danish Oil Cherry and it matched perfectly on the unstained back of an original piece. Likely they used that product to get more consistent color across the varying teak tones. I used it on my last little teak project – 1 or 2 coats – excellent results. Cheers From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim Watts via CnC-List Sent: Sunday, January 18, 2015 8:27 PM To: 1 CnC List Subject: Stus-List Teak stain? I have our companionway steps home for refinishing, and have just had to sand through a layer of what appears to be mahogany(ish) stain to get to the bare teak. Looking around the boat, it looks like it may have the stain on every teak surface. Anyone know anything about what particular stain they used? Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC _______________________________________________ This List is provided by the C&C Photo Album. Please donate to the C&C Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album. Please donate to the C&C Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album. Please donate to the C&C Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
