Actually not all that bad. Yes blocks need to be replaced/modernized and you can do better on the line selection but that is minor stuff and just time. The spreaders, fittings and standing rigging would be my biggest concern. Didn't notice any issues on the welds, etc but hard to tell in person let alone by pictures. Have a good contact at a local loft? Seriously, Internet lists are great but you do want a professional rigger to look at it. 33 is big enough...
John Sent from my iPad > On Jan 12, 2015, at 12:57 PM, Burt Stratton via CnC-List > <cnc-list@cnc-list.com> wrote: > > I had committed a couple weeks ago to take some pics of my halyard sheaves > among other things for another lister. I posted some that might be helpful. > > There are also pics of my spreaders. My lowers seem to be in need of repair > or replacement. I obviously need to clean off the protective tape and expose > the ends / turnbuckles, etc. but there seems to be a fair amount of > corrosion, even cracking. When the weather improves a bit I will head back > down to get a better look. I would consider it a huge favor for someone with > some experience in the review of rigging to take a look and comment. I hope > these links work. It was a little more work than it should seem to be to get > these on Google Drive. > > https://drive.google.com/file/d/0B1jlbdmQzvxLRXhXbUE3eUo4X0U/view?usp=sharing > https://drive.google.com/file/d/0B1jlbdmQzvxLaXQyTExEbEJybzg/view?usp=sharing > https://drive.google.com/file/d/0B1jlbdmQzvxLc3NHS0hIY2syXzA/view?usp=sharing > https://drive.google.com/file/d/0B1jlbdmQzvxLUWhvUmVxZUJrTEk/view?usp=sharing > https://drive.google.com/file/d/0B1jlbdmQzvxLTGpsdXJrUm52LXM/view?usp=sharing > https://drive.google.com/file/d/0B1jlbdmQzvxLLTgzOTY0TDhUOE0/view?usp=sharing > https://drive.google.com/file/d/0B1jlbdmQzvxLT0tyMmFIQXl6eWc/view?usp=sharing > https://drive.google.com/file/d/0B1jlbdmQzvxLSnMtUlBIem9NWm8/view?usp=sharing > https://drive.google.com/file/d/0B1jlbdmQzvxLZ21uY05EWVJraDQ/view?usp=sharing > > Skip > 1974 C&C 33 ¾ tonner > On the hard in walpole > Mast in Portsmouth, RI > > bstrat...@falconnect.com > > _______________________________________________ > This List is provided by the C&C Photo Album. > > Please donate to the C&C Photo Album to keep this list free for all > subscribers. > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of page > at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ This List is provided by the C&C Photo Album. Please donate to the C&C Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
