Chuck, I would not mix thread types. Your seal is only as good as the glue because you don't have enough surface contact between the threads.I like the idea of a tee, but I have not gotten around to installing one.
Joe, I only winterized the fresh water and waste. I figure the Bay water is still in the mid-40s and I'm in salt water, so I should be OK with the engine. Am I delusional? Joel 35/3 Annapolis On Thu, Nov 20, 2014 at 9:26 AM, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > Had some worry yesterday morning. Our temps here in Maryland would be > cold for **January**, let alone November. I usually don’t winterize until > around Christmas, so I just turned the heat on the low 500 watt setting and > set the thermostat to 50. Apparently it was not enough and when I got to > work yesterday I looked at my cabin temp telemetry and it was down to 32 L > It warmed up to the 40s during the day at least. I checked last night and > nothing had frozen, but I cranked the thermostat to about 80 before I left. > The coldest it got last night in the cabin was 51 and it is 55 right now. > > > > *Joe Della Barba* > > *Coquina* > > *C&C 35 MK I* > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
