Joe: I also have a 170 Genoa that came with my boat (1978)...but I've4 never used it. Where do you lead the sheets for a 170. My 38MKII uses a 155 regularly and that sheet leads almost back to the winch. I figured that the previous owner (or the original owner) used the transom corner fitting for a turning block location.
Incidentally, I have the original IOR rating certificate listing the 170 with a penalty of about 3-4 seconds.....to offset that, the owner shortened the main luff dimension by about 3 feet....balanced out his penalty.... Always wondered how you would trim that much sail since it comes back to within a couple of feet of the transom.....Sail bag is labeled H1..North Special 170 Genoa. Someday I'll have to get it out and just set it up to see where it leads..... Best, Ron C. _____ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Thursday, October 23, 2014 9:46 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List oldest sail contest Working jib= 100% jib. My jib has not been used since I got the furling gear around 1987 or so. I have 2 170% genoas that are around 25-28 years old but barely used. Likewise since the furling gear they hardly ever leave the bags. Joe Della Barba Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Burt Stratton via CnC-List Sent: Thursday, October 23, 2014 9:29 AM To: 'Gary Nylander'; cnc-list@cnc-list.com Subject: Re: Stus-List oldest sail contest Working jib? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: Thursday, October 23, 2014 9:16 AM To: Della Barba, Joe; cnc-list@cnc-list.com Subject: Re: Stus-List oldest sail contest You win. Mine is a 1980, still feels new, but as you know, we don't use working jibs much around here. Gary St. Michaels ----- Original Message ----- From: Della Barba, <mailto:cnc-list@cnc-list.com> Joe via CnC-List To: cnc-list@cnc-list.com Sent: Thursday, October 23, 2014 7:35 AM Subject: Stus-List oldest sail contest I am going to take the working jib down to the boat in case we get a honking 25 knot day so I can get a good beat in and it occurred to me that the jib came from C&C when the boat was new in 1973. Does anyone have an older sail than that? Joe Della Barba Coquina C&C 35 MK I _____ _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
