I would look at RAM mounts. My 35/3 has a 9 inch guard I believe.
Joel On Wed, Oct 1, 2014 at 11:46 AM, Tim Goodyear via CnC-List < cnc-list@cnc-list.com> wrote: > I use an Edson arm (also costing more than your GPS) for a Garmin 5" > plotter: > > > http://www.edsonmarine.com/marinestore/index.php?main_page=product_info&cPath=87_100&products_id=430 > > Tim > Mojito > C&C 35-3 > > On Wed, Oct 1, 2014 at 11:19 AM, Della Barba, Joe via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I just got a Standard-Horizon CP180 GPS/chartplotter/fishfinder/radar >> from Fleabay for a good price. This is a 5 inch screen unit that is about >> 8”x5”. I am in a bit of a quandary on where to mount it. On the bulkhead at >> the forward end of the cockpit will make wiring easier and be fairly >> protected from the weather. I usually am in the forward cockpit underway >> with the autopilot remote. For tricky situations where I am at the helm I >> would love it to be mounted on the binnacle, but I am not sure if I like >> the idea of it being so exposed. Has anyone tried putting a navpod on a MK >> I? Does the MK I binnacle guard have the standard 12” spacing or something >> else? >> >> I already have a PC plotter setup that I like, but that draws about 36 >> watts. This unit should be more like 6 watts and can support a radar if I >> want to add the antenna. If I cable it right I can send waypoints back and >> forth from the PC to the plotter. Only downside so far is I need a $170 >> chart chip for a $140 plotter to get any decent level of detail L >> >> >> >> *Joe Della Barba* >> >> *Coquina * >> >> *C&C 35 MK I* >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go bottom of >> page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
