Chris, Try Atlantic Spars in Annapolis. They were able to weld my hatch frame. Joel
On Tue, Sep 2, 2014 at 4:11 PM, Chris Price via CnC-List < cnc-list@cnc-list.com> wrote: > The welder at the Naval Academy shop didn't think he could do an adequate > job. May try to epoxy the halves together. Bacon's didn't have anything > similar. I think it's going to be a winter job. A large pair of vise grips > will do the job temporarily if nothing else works. > > Chris Price > Pradel 35 Mk I > > ------------------------------ > *From: *"Joe via CnC-List Della Barba" <cnc-list@cnc-list.com> > *To: *cnc-list@cnc-list.com > *Sent: *Tuesday, September 2, 2014 3:17:33 PM > *Subject: *Re: Stus-List Transmission/throttle control > > Maybe not Morse. This looks like what we have. > > http://www.westmarine.com/buy/teleflex--mjb-control--159964 > > > > > > *Joe Della Barba* > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Della > Barba, Joe via CnC-List > *Sent:* Tuesday, September 02, 2014 3:15 PM > *To:* cnc-list@cnc-list.com > *Subject:* Re: Stus-List Transmission/throttle control > > > > We had something similar happen in Bermuda. We got a temp weld job to get > us home and then replaced the originals with Morse controls. > > > > *Joe Della Barba* > > Coquina > > C&C 35 MK I > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com > <cnc-list-boun...@cnc-list.com>] *On Behalf Of *John and Maryann Read via > CnC-List > *Sent:* Tuesday, September 02, 2014 7:11 AM > *To:* 'Chris Price'; cnc-list@cnc-list.com > *Subject:* Re: Stus-List Transmission/throttle control > > > > Not familiar with Marmac. Controls mounted on steering pedestal? Who > manufactured it?? They might be a good source. Edson may be a help. > Google is your friend J > > > > John and Maryann > > Legacy III > > 1982 C&C 34 > > Noank, CT > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com > <cnc-list-boun...@cnc-list.com>] *On Behalf Of *Chris Price via CnC-List > *Sent:* Monday, September 01, 2014 10:21 PM > *To:* Rick Taillieu; cnc-list@cnc-list.com > *Subject:* Re: Stus-List Transmission/throttle control > > > > > > Had an interesting experience today after sailing back from the Wye River. > Came into the dock and had to parallel park as usual using the prop walk to > kick the stern in and stop the boat when the casting that holds the handle > split in half as I was putting the engine in reverse. Fortunately, I don't > approach the dock too fast and was able to bail out without hitting > anything, but could not engage the transmission. The kids on the dock that > were prepared to hand off the mooring lines learned a few new words. > > > > I think that the controls are the original Marmac Products controls, and > thanks to Richard Kinder, the previous owner, I have the original parts > list but I suspect Marmac is out of business.. I'll try to have the housing > welded, but it is cheap pot metal. Any thoughts on finding a replacement? > May have to give Bacons a shot. > > > > Chris Price > > Pradel 35 Mk I > ------------------------------ > > > > > ------------------------------ > > <http://www.avast.com/> > > This email is free from viruses and malware because avast! Antivirus > <http://www.avast.com/> protection is active. > > > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
