Joel,
You might have to break down and go through the lazarette. It’s really not that bad once you remove the port scupper drain. I checked the screws on my rudder post. They are all perfectly aligned with the boat centerline, just the way the factory left them. Now I need to find out if the nuts are still tight! Jake Jake Brodersen “Midnight Mistress” C&C 35 Mk-III Hampton VA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Monday, July 28, 2014 9:36 AM To: Alan Bergen; cnc-list@cnc-list.com Subject: Re: Stus-List Play in the steering Alan, Are you able to reach all of the bolts through the access ports? The nut actually came off one of my forward bolts. I'm going to try putting a nut in a socket and hope I get lucky enough to have it catch. I cant get my hand in there. (I was able to tighten the aft bolts.) Any other suggestions? Joel 35/3 The Office Annapolis
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
