Painting instructions from Edson: http://www.edsonmarine.com/support/eb95345.php
Steve Suhana, C&C 32 Toronto On Mon, Jun 30, 2014 at 9:57 AM, Rick Brass via CnC-List < cnc-list@cnc-list.com> wrote: > I reprinted my pedestal circa 208 or 2009 when I was replacing the idler > sheaves that are mounted on the plate below the cockpit sole. I did it off > the boat and my pedestal is white (so less heat to impact the paint) but I > have been pleased with the result and no current indication of decay in the > finish. > > Since I had to remove the idler plate and all the wiring and cables, I > took the pedestal home to work on it in the shop. Sanded the old surface > with something like 120 grit to remove the loose powder coat and give some > tooth for the paint. Primed with Rustoleum primer (think it was zinc > chromate) and painted 3 or 4 coats of off white Rustoleum satin finish > paint (2 cans worth IIRC). > > Now that I have said I'm pleased and the paint is lasting well, I expect > to go to the boat and find it suddenly and unexpectedly flaking off. Oh > well, just another project to add to the list. It is a boat, after all. > > Rick Brass > > Sent from my iPad > > > On Jun 29, 2014, at 22:47, Brad Crawford via CnC-List < > cnc-list@cnc-list.com> wrote: > > > > Do you think it would work well on a black pedestal? Mine has been > eroding away in a few spots over the years. Might be best to remove the > pedestal and have the whole thing powder coated, but maybe the zinc > chromate primer and black paint might get me by for a few year? What do > you think? Anyone have any luck with painting over the cancer while still > on the boat? > > > > Thanks, > > > > Brad > > CnC 36 > > "Dora Pearl" > > Seattle > > > > Sent from my iPad > > > >> On Jun 29, 2014, at 3:45 PM, Jake Brodersen via CnC-List < > cnc-list@cnc-list.com> wrote: > >> > >> Tom, > >> > >> I've used zinc chromate primer and black spray paint. It has held up > well. > >> The primer has a tenacious hold, while the black spray paint may need a > >> touch up after a couple of years. Overall, I'd say it works well. > >> > >> Jake > >> > >> > >> Jake Brodersen > >> "Midnight Mistress" > >> C&C 35 Mk-III > >> Hampton Va > >> > >> > >> > >> > >> > >> > >> -----Original Message----- > >> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tom > >> Buscaglia via CnC-List > >> Sent: Sunday, June 29, 2014 12:27 PM > >> To: cnc-list@cnc-list.com > >> Subject: Stus-List Aluminum coating > >> > >> The black coating on the stanchion bases along the rail on Alera have > flaked > >> off in a few spots. I bet someone here has dealt with this issue... > >> > >> Tom Buscaglia > >> S/V Arera > >> 1990 C&C 37+/40 > >> Vashon WA > >> P 206.463.9200 > >> > >> > >> > >> _______________________________________________ > >> This List is provided by the C&C Photo Album > >> > >> Email address: > >> CnC-List@cnc-list.com > >> To change your list preferences, including unsubscribing -- go bottom of > >> page at: > >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > >> > >> > >> > >> _______________________________________________ > >> This List is provided by the C&C Photo Album > >> > >> Email address: > >> CnC-List@cnc-list.com > >> To change your list preferences, including unsubscribing -- go bottom > of page at: > >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > > This List is provided by the C&C Photo Album > > > > Email address: > > CnC-List@cnc-list.com > > To change your list preferences, including unsubscribing -- go bottom of > page at: > > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > >
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
