On our 37+ the flux gate is under the settee against the forward bulkhead, on the centreline as that end of the U shaped settee allows room for this. The course computer is behind instrument and switch panels in the nav area.
Ken H. On 3 June 2014 12:46, Tim Goodyear via CnC-List <cnc-list@cnc-list.com> wrote: > I installed an X-5 a few years back on my 35-3 (it worked perfectly out of > the box, so don't fret too much). > > The fluxgate is in the wet locker (like Joel's) - near the mast and pretty > low down to reduce motion, away from other wiring to reduce electromagnetic > interference. > The course computer (separate from the control head on the X5) is in the > over-settee locker on the bulkhead just ahead of the nav station - close to > the switch panel for wiring, dry, conveniently between connections for the > other components. > You don't have many options for the control head / wheel drive... but, my > control head seems to be where some people rest their knees in the cockpit, > and it is possible to press buttons with knees even with the cover on, > which can be interesting the first few times. > > Tim > Mojito > C&C 35-3 > Branford, CT > > > > >>> ------------------------------ >>> >>> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of >>> *Steven >>> Winks via CnC-List >>> *Sent:* June 3, 2014 10:03 AM >>> *To:* cnc-list@cnc-list.com >>> *Subject:* Stus-List Raymarine X5 auto pilot installation C&C 34+ >>> >>> >>> >>> Hi. I am planning to install a Raymarine X5 wheel pilot in my C&C 34+. >>> Does anyone have any advice on where best to install the computer and flux >>> gate compass? >>> >>> >>> >>> Thanks for any help. >>> >>> >>> >>> Steve Winks >>> >>> Corsair VI >>> >>> 1990 C&C 34+ >>> >>> Midland, ON >>> >> > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
