Don’t forget to properly fuse the wire within seven inches of the connection to 
+12VDC!!!  This fuse should be sized to protect the wire going to the pump 
switch.  There should also be a fuse closer to the pump, sized per the pump 
instructions; this is to protect the pump from overheat/fire in case the shaft 
or impeller seizes.

Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI   :^(

On May 26, 2014, at 10:54 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> 
wrote:

> Install a Rule Model 43 rocker switch in a convenient but out of the way 
> location.  Wire the switch's positive to one of the battery cables on the 
> back of your battery switch (not the common, the one marked #1 or #2) and the 
> negative to ground (for the indicator light).  By connecting to the #1 or #2 
> connection, you're essentially connecting to one of the batteries.  As a 
> rule, I don't like to connect directly to a battery inside the battery box.

_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to