Gary, I read the VC Offshore instructions today. It is approved to put over Baltoplate. Both paints have compatible chemistry. I've done it and it works well.
I was only reading the instruction to find out the temperature limits for applying VC. It's currently 34F and snowing here. Evidently I can't paint until the hull is at least 50F. Jake -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander Sent: Tuesday, March 25, 2014 9:58 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Bottom Paint Question I think the original note said there had been Baltoplate and then something else on top - and the something else was what was peeling. My impression is not many other paints (or anything else) stick to Baltoplate, so it has to be roughed up and/or stripped off, which means what is on top is the problem. Unfortunately, this top coat will have to be taken off or you will end up just patching it every year. Gary _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
