The Universal Admiral panel on my 38 is set into a rectangular hole in the 
bulkhead and held in place with 8 screws. Can’t you just move the existing 
panel to a new location and glass in the old opening?

 

Failing that, a Universal Admiral Panel is around $250 – I thought about 
upgrading my instruments when I installed the new bobtail engine in 2010, until 
I found out I already had the upgrade instrument panel. Can’t you just buy a 
new panel intended for use with your engine, install it, and fill in the old 
holes (assuming there are individual holes for the instruments, key switch, and 
assorted pushbuttons)?

 

Rick Brass

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay
Sent: Saturday, February 22, 2014 4:08 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Engine Gauges -- Are the marine ones somewhat universal?

 

I would like to use the existing senders (I work hard to remain lazy).

 

So how would I test the resistance? Unhook the wires and check the ohms with my 
multimeter? Or can I test with them connected? 

 

All the best,

 

Edd

 

 

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to