Mark, Once you decide on which tank you want, make up a cardboard box mock-up of it to make sure you'll be able to get it into the spot where you want to mount it. I did that when I put a holding tank in my 25. I was lucky and the tank I wanted just fit through the opening under the V-berth.
Rick Taillieu Nemesis '75 C&C 25 #371 Shearwater Yacht Club Halifax, NS. -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dr. Mark Bodnar Sent: February-11-14 18:04 To: cnc-list@cnc-list.com Subject: Re: Stus-List Fuel tank Anyone know if the Moeller tanks already come with a fuel gauge/sensor? I can buy the kit with the electronic sensor and the return line - but I'm happy to T the return line into the fuel feed or into the vent line - but if I need to buy a fuel sensor anyway they I will likely buy the kit (of course I'll also need an electronic gauge as well). As for repair or replace - I guess it makes sense as I think about it - a repair might buy me 2-10yrs - and failure could be a horrible mess. A new plastic tank will last longer than I will and won't ever be a point of concern. Don't think I'll bother having a new custom made aluminum tank - one of the pre-fab Moeller tanks will work with a bit of effort. Next time I'm down at the boat I need to do some measurements - make sure everything will fit and figure out how to fabricate a new base and maybe fiberglass in some edge frames. Mark --------------------- Dr. Mark Bodnar B.Sc., D.C., FCCOPR(C) Bedford Chiropractic --------------------- There is no cure for birth and death save to enjoy the interval. - George Santayana On 11/02/2014 4:44 PM, Rich Knowles wrote: > Thanks Wal. Other than the heating issue, which shouldn't be a problem as the fuel gets mixed with incoming fuel from the tank, many fuel filter assemblies have an in port for the return line. > > Rich > >> On Feb 11, 2014, at 15:51, Wally Bryant <w...@wbryant.com> wrote: >> >> Yes. It works fine. >> >> <http://www.wbryant.com/StellaBoat/Projects/fuel/index.htm> >> >> >> Rich wrote: >>> Has anyone tried teeing the fuel return line into the fuel feed line before the filter? Just wondering?? >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com CnC-List@cnc-list.com > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com CnC-List@cnc-list.com > _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4259 / Virus Database: 3697/7087 - Release Date: 02/12/14 _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
