Steve:
It was Tom Anderson with hull # 1197......our 32 is a 1984 @ hull
#277....I highly doubt there were too many more built after that....FYI
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2014/02/06 9:13 AM, Stevan Plavsa wrote:
John, you sure about that hull number? I didn't think they made that
many. I'm hull #59.
Steve
Suhana, C&C 32
Toronto
On Wed, Feb 5, 2014 at 6:03 PM, Tom Anderson <t...@nonpareilracing.com
<mailto:t...@nonpareilracing.com>> wrote:
John,
FYI, My 32 came with a gate on the upper rail from the factory.
Hull number 1197.
Tom Anderson
C&C 32 Nonpareil
Marblehead, MA
95 days to launch
97 days to first Wednesday Night Race
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf
Of John Russo
Sent: Wednesday, February 05, 2014 2:34 PM
To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
Subject: Re: Stus-List Climing over the stern rail is a pain
I have a 32 with a double rail at the stern and am thinking about
cutting the upper and adding a gate. My swim ladder actually
comes slightly above the lower rail when up where it tie it. My
concern is that I have a motor mount and a 65 Lb outboard on the
stern rail port side vertical post which I will have to shift
more to port but wondered about the rail strength after cutting.
Any thoughts? I am also looking for a lighter outboard with a
little less HP.
John
Arpeggio 32
Norwalk CT
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
