I'm going to be putting together a C&C 32 specific site, just because (not to compete with C&C Photoalbum). I think these boats are underrated and when I was looking at purchasing I could find little info from other owners. Having a boat specific site with lots of good info from other owners is good news when it's time to sell, too.
Steve Suhana, C&C 32 Toronto On Thu, Feb 6, 2014 at 9:35 AM, Tom Anderson <t...@nonpareilracing.com>wrote: > Sorry, I meant hull ID number 197, which somewhere I translated to actual > hull number 46. Manufactured in January. > > Message: 10 > Date: Thu, 6 Feb 2014 08:13:58 -0500 > From: Stevan Plavsa <stevanpla...@gmail.com> > To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> > Subject: Re: Stus-List C&C 32 stern pulpit > Message-ID: > <caddevn58nbmp0u1x6huj2zvg-roo_ipjqbcwbdit_xvqtz_...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > > John, you sure about that hull number? I didn't think they made that many. > I'm hull #59. > > Steve > Suhana, C&C 32 > Toronto > > > > On Wed, Feb 5, 2014 at 6:03 PM, Tom Anderson <t...@nonpareilracing.com > >wrote: > > John, > > > FYI, My 32 came with a gate on the upper rail from the factory. Hull > > number 1197. > > > Tom Anderson > > C&C 32 Nonpareil > > Marblehead, MA > > > 95 days to launch > > 97 days to first Wednesday Night Race > > > > From: CnC-List > [mailto:cnc-list-boun...@cnc-list.com<cnc-list-boun...@cnc-list.com> > <cnc-list-boun...@cnc-list.com>] > > On Behalf Of John Russo > > > Sent: Wednesday, February 05, 2014 2:34 PM > > > To: cnc-list@cnc-list.com > > > Subject: Re: Stus-List Climing over the stern rail is a pain > > > > > I have a 32 with a double rail at the stern and am thinking about cutting > > the upper and adding a gate. My swim ladder actually comes slightly above > > the lower rail when up where it tie it. My concern is that I have a motor > > mount and a 65 Lb outboard on the stern rail port side vertical post which > > I will have to shift more to port but wondered about the rail strength > > after cutting. Any thoughts? I am also looking for a lighter outboard > > with a little less HP. > > > > John > > > Arpeggio 32 > > > Norwalk CT > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
