Thanks Bob, that would be helpful.
John johnrussob...@optonline.net From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert Abbott Sent: Thursday, February 06, 2014 12:39 PM To: cnc-list@cnc-list.com Subject: [SPAM]Stus-List Climing over the stern rail is a pain John Our 32 has a lower rail and a gate up top.....looks to be factory but not sure....can send you a pic offline if you want. Rob Abbott AZURA C&C 32 - 84 Halifax, N.S. On 2014/02/05 3:33 PM, John Russo wrote: I have a 32 with a double rail at the stern and am thinking about cutting the upper and adding a gate. My swim ladder actually comes slightly above the lower rail when up where it tie it. My concern is that I have a motor mount and a 65 Lb outboard on the stern rail port side vertical post which I will have to shift more to port but wondered about the rail strength after cutting. Any thoughts? I am also looking for a lighter outboard with a little less HP. John Arpeggio 32 Norwalk CT
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
