Hi Dennis & Peter,
I would say when, not if, you replace that forestay. The gap showing
in the lay of the wire in this pic would lead me to inspect for a
broken strand (or two).
http://imagizer.imageshack.us/v2/800x600q90/707/1lxd.jpg
Cheers, Russ
Sweet 35 mk-1
At 08:18 AM 19/01/2014, you wrote:
Peter,
What caused the damage to the top of the extrusion? Hard to tell
from the pic. Need to figure that out.
...
If you are replacing the forestay, you can do this when you drop the
unit for that. I'm assuming you're replacing it with another swaged
forestay or are you using a Norseman or NavTec compression
fitting? If a swaged eye, then you will have to disassemble the
furler completely. If you are going that way, just upgrade to the MKIV.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
