Thanks Dennis Rides on the barrel of the swage.
I wonder if I can trim this down? I didn’t think by looking at the info available online that it should ride on the forestay. I’m ordering a new genoa within the next two weeks .... so now’s the time to fix this. Here are some pictures: http://imagizer.imageshack.us/v2/800x600q90/707/1lxd.jpg http://imagizer.imageshack.us/v2/800x600q90/836/pll3.jpg http://imagizer.imageshack.us/v2/800x600q90/571/fw5u.jpg That forestay needs to be replaced and currently there is no halyard restrainer either. Discussing those with a rigger right now. Of course I could just replace the furler as well ....I’ve gotten some info on new ones. I can get a Mark IV Unit 0 for under $1200. Toggle and restrainer and forestay would be additional to that. Or a Furlex for about $1600 that includes the restrainer and forestay. From: Dennis C. Sent: Saturday, January 18, 2014 5:22 PM To: Peter Fell ; cnc-list@cnc-list.com Subject: Re: Stus-List Harken Furler Mark 1 Unit 0 Peter, I don't think my buddy and I have any parts for a Mark 1. I will check with him tomorrow. He may have something in his "gold pile". We haven't worked on a Mark 1 in a long while. Last Mark 1 I worked on was basically an upgrade to the newer extrusions to get rid of the roll pins. As for the top cap, is the top of the extrusion riding on the barrel of the swage eye or on the wire? Dennis C. Touche' 35-1 #83 Mandeville, LA ------------------------------------------------------------------------------ From: Peter Fell <prf...@gmail.com> To: cnc-list@cnc-list.com Sent: Saturday, January 18, 2014 3:25 PM Subject: Stus-List Harken Furler Mark 1 Unit 0 Just wondering if anyone local has a manual and parts list for a Mark 1 Unit 0 furling unit that I could borrow and copy. Looking for parts too. Mine is missing a chunk out of the top of the uppermost foil + the top cap. So I’m looking for a foil piece, cap, possibly foil connector, etc. I’ve got a partial copy of the parts list – looks like might have been a couple versions of this unit. Peter Fell Sidney, BC C&C 27 MkIII _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
