George, I strongly suggest measuring the dimensions for the sail on the boat. Don’t trust the published values. They are only good for getting quotes from the sailmakers.
I got new sails last fall and it turned out that only the boom length (E) was correct. My old sail’s P was too short, but the actual P (measured at the mast was shorter than the published by at least 6”). I suspect that my boom might have been moved up by one of the POs (though no marks on the mast). Marek (in Ottawa) _________________________________________________ Message: 3 Date: Tue, 14 Jan 2014 17:04:28 -0500 From: "George Cone" <gc...@alpinesy.com> To: <cnc-list@cnc-list.com> Subject: Re: Stus-List folding prop for C&C 40 Message-ID: <005001cf1174$98864a90$c992dfb0$@alpinesy.com> Content-Type: text/plain; charset="us-ascii" The HIN- is ZCC40129M81H, so I assume that means #129, the present prop is a 2 blade fixed, I also have a question for you on main sail dimensions, is there only one P=46.5 or is it possible to be longer, I am considering a new main as it looks like the main is an original. I am also led to believe (and I checked) that the draft is 8.25' instead of 7'-more confusion, (I asked Bob about it at Block Island and he did not know about that deep an option. Thanks, George
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
