Also
Check the stands regularly and adjust as required if the ground freezes and thaws where you store your boat _____ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. Sent: December 18, 2013 3:26 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Raised floor boards [was Crack where keel meets hull] When one puts a boat on the hard, there's several things to consider. * Locating the stands on bulkheads so you don't depress/deform the hull * Leveling the boat so the cockpit drains (some cockpits drain forward, some aft) * Achieving a good balance of weight on keel vs stands _____ From: Peter <pe...@cruisingnet.com> To: cnc-list@cnc-list.com Sent: Wednesday, December 18, 2013 11:45 AM Subject: Re: Stus-List Raised floor boards [was Crack where keel meets hull] Thanks for all the great feedback, sounds as though I only have a cosmetic issue with the crack to deal with. As I am only going cruising for four months I'll probably just leave it. As for having bought Outrider, I have had her since 07. Contemplated selling her for a while - if you are reefing to listing on Yachtworld a couple of years ago, that would have been during that time. Think I am going to be hanging on to her for some time longer... One other thing I noticed was that after the boat has sat on the hard for a long period of time, the floorboards don't sit flat. I suspect that sitting on the keel pushes up the sole. After a couple of months back in the water the floor settles back down. Normal stuff? Thanks, Peter _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com <http://www.cncphotoalbum.com/> CnC-List@cnc-list.com _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2247 / Virus Database: 3658/6430 - Release Date: 12/18/13
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
