Kevin;
I have a pair of the overhead fluorescent lights that were OEM on my 38. I replaced them several months ago with a pair of LED fixtures made by Alpenglow, based on the opinion of Practical Sailor that these are the very best general illumination you can put on a boat, and my previous experience with an Alpenglow dual wattage white/red florescent fixture on my 25. My old fixtures look a lot like the ones that Dennis recommended. I'll gladly send my old fixtures to you. Just reimburse me for the shipping cost. Contact me off list with your address if you want them. I'll dig them out of the storage locker and let you know what the shipping charges are. Rick Brass Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Kevin Driscoll Sent: Friday, December 13, 2013 3:36 PM To: cnc-list@cnc-list.com Subject: Stus-List Wanted: Cabin lights for CNC 30mkII Hi everybody. I am looking to buy replacements for a few fixtures on our 1989 30mkII. (1.) Our "under counter" florescent fixture on the head. Single bulb mounted over the sink. (2.) Our overhead florescent fixtures in the cabin. These are two bulb fixture s mounted underneath the translucent plastic panel on the cabin top. Would be willing to replace with same fixtures if someone here has some for sale. Or... Open to suggestions for good valued LED substitutions. Thanks! Kevin C&C 30 mkII Sent from a mobile device.
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
