Tim, I haven't gotten his quote yet but Hall Is at $3,040 and Bay Sailing Equipment in New Bedford is at $2,939. The quote from Bay Sailing includes 2, 3/8 x 6.75" long and 8, 7/16 x 7.38" long NAVTEC Screws ad I'm guessing those are not included in the Hall Spars quote.
Interestingly, Hall quoted a Harken Furler at $1,920 (the list minus a 20% discount) while Bay quoted the same furler for $2416 (list). However, to that you need to add some hardware ($75), furling blocks and line ($328) and some assembly labor ($275). I'll make a decision after I get a quote from Kevin but as you can see it is something thatis worth shopping around for. Dave -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tim Goodyear Sent: Wednesday, December 04, 2013 8:22 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List wire halyards How much does Kevin want for the new rigging? Tim Mojito C&C 35-3 Branford, CT > On Dec 4, 2013, at 3:06 PM, "David Jacobs" <davidjaco...@comcast.net> wrote: > > Interestingly, I was talking to people at NE Rigging Systems in > Concord, MA just yesterday about replacing the rod on my 1983 C&C35 MK > III and they told me about this issue. Apparently C&C changed from > aluminum through bolts (through the mast holding the rod connection > fittings) in the late 80's to SST through bolts because the internal > wire halyards would cut through the aluminum bolts over time. They > just did a C&C 40 and found that the aluminum bolts were almost completely cut through. > > -----Original Message----- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of > Wally Bryant > Sent: Wednesday, December 04, 2013 2:07 PM > To: cnc-list@cnc-list.com > Subject: Re: Stus-List wire halyards > > Be careful stowing them. When I re-rigged I replaced the spreaders > because a PO wrapped the wire halyards behind the spreaders to keep > them quiet. The wire wore completely through the aluminum trailing > edge, and I'm pretty sure that weld has structural value. <G> > > > Jimmy Kelly wrote: >> however wire still appears to do the job.best > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com CnC-List@cnc-list.com > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
