Joanne, Was there any anode (zinc) left? On the Chesapeake I go through several in a season. You might consider putting on 2 or having someone dive and check during the season.
Joel 5/3 Annapolis On Tue, Nov 26, 2013 at 11:05 AM, Rich Knowles <r...@sailpower.ca> wrote: > Welcome Joanne! > > What is the engine in your boat and shaft diameter? > > Rich > > > > > > > > On Nov 26, 2013, at 11:53 AM, joanne.dowd3...@gmail.com wrote: > > Hello all > > I have been watching the list for a while but never contributed until now. > Couple years ago we bought a 1980 C&C 30 MKI from the original owner. > wonderful wonderful boat! This was our first boat and things have been a > bit daunting at times- but I cant tell you how much the list helps. > > When we pulled her this year we had some serious prop corrosion issues. We > are still trying to assess the cause (anode was replaced last spring but > perhaps I didn't get good contact)but regardless we will need to replace > the prop. It is a 15 inch radius 2 blade fixed but the erosion is such that > I cannot read the pitch- how do I figure this out? > > Any suggestions as to suppliers as well?- we will likely stick with the 2 > blade fixed. has any one had experience with the urethane perfect pitch > props? > > Thanks in advance > > Joanne Dowd > SV Islay > Hamilton ON > > Sent from Windows Mail > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
