Before you replace another pump, try headlube - available at West Marine (and
others). I was about to venture into another replacement project when this was
suggested. My pump wasn't drawing water from the thru hull, but was pumping OK
into the holding tank. I put the lube in, and after about 15 pumps, here came
the water! No project.
Gary
----- Original Message -----
From: Tim Goodyear
To: cnc-list@cnc-list.com
Sent: Wednesday, October 23, 2013 7:09 AM
Subject: Re: Stus-List New Head and holding tank system.
Danny, what are the reasons you are going with the Raritan PHC (there are
many options out there)? I am done with replacing the pump annually on the
Wilcox Crittenden / Thetford Headmate head in Mojito and was looking at a
replacement. Now, if only the pumps were interchangeable between models...
Thanks,
Tim
On Mon, Oct 21, 2013 at 11:27 AM, djhaug...@juno.com <djhaug...@juno.com>
wrote:
Okay guys,
I'm planning a new waste system. I'm going with the Raritan PHC head and a
new holding tank. I currently have a very old Jabsco head and a bladder
holding tank. I really don't like the bladder. It has worked okay but, one
day it will fail and it will be disgusting! I just want rid of it...
...
Danny
Lolita
1973 Viking 33
Westport Point, MA
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
------------------------------------------------------------------------------
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
