Rich; If you want the long story of how I know this, I'll tell you off the list, but FWIW:
The LF38 came with rudder shaft in 2 different diameters. The owner of the LF38 formerly known as Banana Wind (which I think is now in Bayfield, WI) can tell you more about this. One of the diameters is 2 1/4" OD, and those rudder stocks were made two ways. One was made from 2" schedule 80 stainless tube with a machined spud welded to the top for the emergency steering and rudder support nut. The other was machined from a 2 1/4" OD solid bar. The shaft on my replacement rudder is the solid bar stock, and came from the original rudder on Banana Wind. If you need it, I still have the top 18" of my original rudder stock with the machined spud still welded in place. During my experience, I was told by a friend who is a metallurgist that you weaken stainless (in my case the schedule 80 tube) by 30% or so when you bend it, and by another 40-50% when you heat it to straighten it. It also becomes more susceptible to crevice corrosion after heating. The blade from my original rudder is somewhere on the floor of the Neuse River in NC, where it fell off as the result of crevice corrosion where the rudder stock enters the blade about 4 years after the original heat and bend repair of a bent shaft. I wish I had argued with the insurance company for a replacement rudder instead of the heat and bend repair they paid for. BTW, my replacement rudder came from Foss Foam in Florida, and cost about $2800US in 2008/2009 including freight and using the rudder stock I provided them. They probably still have the drawings for the rudder they supplied to me. Good luck on your project. Rick Brass Imzadi -1976 C&C 38 mk1 la Belle Aurore -1975 C&C 25 mk1 Washington, NC -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Knowles Rich Sent: Monday, September 30, 2013 9:37 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Bouncing Off a Shoal Thanks for the sympathy:). Looks not too bad; bent rudder post, but I'll know more later today when she comes out. I'll supply more amusement at that time. Rich Knowles Indigo. LF38 Halifax _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
