Marek You don't specify the C&C model, but if you have anything like mine. You have to remove two small bolts that hold the compass light, then lift off the stainless compass housing. That will give you access to the long bolts that hold the top pieces of the binnacle together
-- Jonathan Indigo C&C 35III SOUTHPORT CT On Aug 28, 2013, at 8:19, "Marek Dziedzic" <dziedzi...@hotmail.com> wrote: > Hi, > > I bet that this topic has been discussed, but I would appreciate some hints. > > I have a problem with the transmission lever/cable - the transmission barely > engages (and sometimes does not), when I switch to forward - the lever hits > the binnacle. The easy option would be to make adjustments at the > transmission end; however, I am at the end of the adjustments. > > I looked, briefly, at removing the compass, but I could not find any bolts or > other fasteners that hold it to the pedestal. > > I would appreciate any hints on how to remove the compass, so that I could > get into the belly of the pedestal and adjust the transmission cable. > > thanks > > Marek Dziedzic > in Ottawa > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
