I had an identical thing happen to me. A new cap was not the answer. A new fitting was the answer. The cap and fitting are both aluminum, which doesn't seem to like sewer gasses all that much. Since I was tossing the fitting, I think I just unscrewed it from the deck and slipped/pryed the hose off and removed it. Stuff a rag in the open end of the hose so you don't pass out. Then you get to fill the mounting holes with epoxy and do that deck penetration correctly.
-Keith -----Original Message----- From: Joel Aronson [mailto:joel.aron...@gmail.com] Sent: Monday, August 05, 2013 2:08 PM To: cnc-list@cnc-list.com Subject: Stus-List Waste fitting stuck The aluminum waste deck fitting is stuck. Even with a good spanner wrench I could not budge it. I sprayed PB Blaster on it. If the O ring is good, the Blaster may not penetrate. I thought of drilling holes, inserting bolts and using a breaker bar and buying a new cap. Other less drastic ideas? -- Joel 301 541 8551 _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
