The PO of my boat placed a solar vent half way between the mast and the foreward hatch. Can't say that I would have decided to cut such a large hole in the cabin top my self, but it has worked out just fine. It is at a high point, it is in the head, and it looks good from the outside of the boat.
Steve Thomas C&C27 MKIII Port Stanley, ON -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Chuck S Sent: Sunday, August 04, 2013 8:43 AM To: Bev Parslow; cnc-list@cnc-list.com Subject: Re: Stus-List where to put the solar fan FWIW, I faced the solar fan problem several years ago. I studied the boats at several marinas, especially the newer model boats built after solar fans became a nice option. I saw the forward hatch as the most common place for a first solar fan. I added a second fan in the head, and two more at the high points in the cabin. One is above the galley and another is opposite. The boat is much fresher smelling now. Some solar fans can be switched from inside, Exhaust, Off, or Intake. Others need the fan blades to change from exhaust to intake. I have all four set on exhaust and rely on vents and companionway for intake. The only time I turn them off is when I'm trying to heat the boat. Last thought. I find they keep the boat fresh smelling, but do little to cool the boat at my latitude. Solar fans can't replace AC. The sun is just too powerful and we get a lot of 90plus days each summer so the cabin is usually a little warmer than ambient temperature. It's tough to cool with 90 degree air. They do better after the sun sets and the air cools. Chuck Resolute 1990 C&C 34R Atlantic City, NJ -------------------------------------------------------------------------------- From: "Bev Parslow" <bparslo...@yahoo.ca> To: cnc-list@cnc-list.com Sent: Saturday, August 3, 2013 3:24:50 PM Subject: Stus-List where to put the vent Just bought a 4 inch solar powered vent. What is the best place for it? The boat is a 29 mark 2. We could try it on the forward hatch, the non opening acrylic panel in the main cabin, or take out the vent in the head and make it bigger. Are there any other options? _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
