Were you able to find the proper internal mast track cars for this? I'm trying to do the exact same thing on my 85' 33 Mk2 and having a heck of time finding the right parts. Adding a T-Track doesn't seem like a good/easy answer as the internal track is an inch wide and standard 1.25" track has a base of about 11/16ths. I've thought of making a spacer but there has to be a better way.
J.R. Farrar 85' C&C 33 Mk2 Bella Ravello From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tim Sippel Sent: Friday, June 28, 2013 2:34 PM To: cnc-list@cnc-list.com Cc: Rob Maclachlan Subject: Re: Stus-List C&C33 Mast Track Are we talking mainsail or Spinnaker pole track ? If spinnaker.. I agree with below. I have a C&C 33MKII with the “internal car” and the plastic track seems to be simply cut and removed from lowest to highest point . The Block at high and low points are also built to fit in the internal track, and a car runs in the track , if you go this route be sure to get the plastic runners for the car. … the track itself is part of the C&C mast extrusion I believe. Blah blah blah. Tim <http://www.timeanddate.com/worldclock/city.html?n=250> Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Fountain Sent: Friday, June 28, 2013 2:18 PM To: cnc-list@cnc-list.com Cc: 'Rob Maclachlan' Subject: Re: Stus-List C&C33 Mast Track Contact Rob MacLachlan sa...@southshoreyachts.com at South Shore Yachts http://southshoreyachts.com/ – there is a track built into the mast and a car that runs in it, along with blocks to move the car up and down at the mast. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Raymond Macklin Sent: June-28-13 1:53 PM To: cnc-list@cnc-list.com Subject: Stus-List C&C33 Mast Track I am looking to put a mast track on my 1985 C&C 33. It does not currently have a track. I have purchased a 1" track and that is too small. I just received an 1 1/4 track that i think is questionable. I just saw online a 1 1/2 track. Do i need to order that one now? Does anyone have the name of the mast manufacturer? Also, how do i remove part of the existing plastic filler without destroying it? Ray LakeHouse Libertyville, IL
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
