Kyle,
Spindle? Look at the link Josh sent you and make sure we're all talking about
the same parts. Try a carpenter's knife (5 in 1 knife) to free the spindle.
Slide the sharp edge under and gently tap it. The spindle should move.
Look under the winch for the main shaft. Often, dried grease will "glue" the
splines together. Try tapping it from underneath. It should only be held in
by the retaining ring which you have already removed.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>________________________________
> From: Josh Muckley <muckl...@gmail.com>
>To: cnc-list@cnc-list.com
>Sent: Wednesday, July 10, 2013 6:49 PM
>Subject: Re: Stus-List Barient 26 stainless steel 2 speed winch trouble C&C 35
>mk1
>
>
>
>Don't un-bed the winch. Follow the directions at the link below.
>I recently rebuilt all of mine (Barient 21,24, and 32). None of them seemed
>as painful as the 26. I did have one pawl on one of my 21's that was rusted
>in the closed position.
>Good luck,
>Josh Muckley
>S/V Sea Hawk
>http://l-36.com/winches_pages.php?winch=winches8.htm
>--
>When privacy matters.
>http://www.secure-my-email.com
>I realize I am asking for a lot here but I would like to at least ask before I
>un-bed my winch from the deck. My main starboard winch is slipping in low gear
>which has rendered it unit useless to me forcing me to rely on the small
>cousin behind it.
>
>
>I have had the drum off and have cleaned and greased it to the best of my
>ability but was unable to get to the low gear. There are several grade 5 bolts
>that appear to be mounting the spindle to the deck plate/gear carrier. I
>removed the bolts but could not break the spindle free. Is this pressed in? I
>didn't want to start banging on anything until i consulted with the gods.
>
>
>Note the main shaft did not come out either.
>
>
>Thanks in advance for your help with this.
>
>
>- Up winch creek
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
